Elite Scope Rings

2026-01-27T16:30:48+01:00

Price: 246.00

The MDT Elite rifle scope rings offer a robust and lightweight mounting system for your optics. Made from precision-machined aluminum.

DETAILS
The MDT Elite rifle scope rings offer a robust and lightweight mounting system for your optics. They are made of precision-machined aluminum and are available in diameters of 30 mm, 34 mm, and 35 mm.

The two diameter options are available in four different heights (measured from the top edge of the rail to the center of the track).

SPECIFICATIONS
• Designed for maximum precision and stability
• 25 mm (0.984 in) lateral contact with the riflescope tube
• 30 mm (1.181 in) lateral contact with the mounting rail
• The main body is manufactured on a state-of-the-art automated 7-axis CNC machine tool.
• The extra-wide profile ensures extremely stable mounting
• The lower rail interface is machined simultaneously with the scope clamp interface, ensuring the perpendicularity and parallelism of all rings.
• Coordinate measuring machine tested with a precision of 1.5 millionths of an inch
• Made from solid 7075-T651 aluminum – only one third the weight of steel with comparable strength
• The extra-thick clamping system does not bend, fatigue, or loosen even with frequent use.
• Integrated spirit level on medium, tall and extra-tall rings (no spirit level on low rings)

The stepped base-cap interface allows the fasteners to be tightened on one side before the final alignment of the riflescope.
• Six oversized #8-32 grade 8 screws are used to clamp the riflescope.

• Elegant curves blend harmoniously into most rifle scopes.
MDT precision scope rings are designed and manufactured according to STANAG 4694, also known as the NATO specification. This means that the scope ring sits firmly on the top of the scope mounting rail and pressure is applied to the underside of the angled rail surfaces to ensure a stable connection (see illustration below).
In contrast, mounts conforming to the US MIL-STD-1913 specification are only attached to the angled sides of the rail. This creates a small gap between the top of the rail and the bottom of the mount, significantly reducing the contact area between the mount and the rail.
NATO tests have shown that the STANAG mounting method increases the robustness of the connection, resulting in improved alignment repeatability. MDT Elite precision riflescope rings can be mounted on riflescope mounting rails that conform to both STANAG and MIL-STD specifications.